 |
 |
 |
|
3M Carton Sealing Tape - 1.6 Mil General Purpose -
Hot Melt Based adhesive. Super strong pressure sensitive polypropylene
tape for repetitive volume packaging. This tape is ideal for light and medium-duty applications. Roll to roll consistency increases productivity. Tensile strength is 19 pounds per inch of width.
This General Purpose tape has good holding power to fibreboard.
- Tartan™
Box Sealing Tape
369
Product Description Tartan™ Box Sealing Tape 369 is a general purpose packaging tape used for noncritical
box sealing applications. This product has a conformable backing and a
pressure sensitive hot melt adhesive system. This construction provides a good
closure for lightweight boxes exposed to minimal distribution hazards.
Typical Physical
Properties
Technical Data April, 2006
Note: The following technical information and data should be considered representative
or typical only, and should not be used for specification purposes.
ASTM Test Method
Adhesion to Steel: 30 oz./in. width (32 N/100 mm width) D-3330
Tensile Strength:
Machine Direction: 19 lbs./in. width (333 N/100 mm width) D-3759
Cross Direction: 38 lbs./in. width (666 N/100 mm width) D-3759
Elongation at Break: 160% D-3759
Thickness - Backing: 1.0 mil (0.025 mm) D-3652
Total: 1.6 mil (0.041 mm) D-3652
Holding Power to Fiberboard: 1,000 + minutes D-3654
Construction Backing Adhesive Colors
Biaxially oriented Pressure sensitive hot Clear and tan
polypropylene film melt rubber-resin
Features • Adheres to a variety of surfaces.
• Low strength conformable backing.
• Edge tear and split resistance.
• Good holding power to fiberboard.
• Complies with the environmental considerations of ASTM D 1974-92.
• Reliable closures.
• Roll to roll consistency increases productivity for improved unit costs.
Tartan™ Box Sealing Tape
369
Application Techniques An extensive line of application equipment including hand held manual dispensers
and semi-automatic and fully automatic equipment is available. Application of
Tartan™ Box Sealing Tape 369 is most easily accomplished at room temperature.
At colder temperatures, approaching 32°F (0°C), the adhesive becomes more firm.
Once applied, Tartan tape 369 performs well throughout the normal temperature
ranges typically encountered by packaged products in shipping and storage
environments.
Storage Conditions Store in a clean, dry place. Temperature of 40-80°F (4-26°C) and 40 to 50% relative
humidity are recommended.
Clear Tan
Standard Widths: 36 mm, 48 mm, 72 mm 48 mm and 72 mm
Core Size (ID): 3 in. 3 in.
Lengths: 50 m, 100 m, 914 m, 1500 m 100 m
Available Sizes
Printed in U.S.A.
©3M 2006 70-0710-0209-4 (4/06)
Recycled Paper
40% pre-consumer
10% post-consumer
All statements, technical information and recommendations contained in this document are based upon
tests or experience that 3M believes are reliable. However, many factors beyond 3M’s control can affect
the use and performance of a 3M product in a particular application, including the conditions under
which the product is used and the time and environmental conditions in which the product is expected to
perform. Since these factors are uniquely within the user’s knowledge and control, it is essential that the
user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the
user’s method of application.
Product Use
Unless stated otherwise in 3M’s product literature, packaging inserts or product packaging for individual
products, 3M warrants that each 3M product meets the applicable specifications at the time 3M ships the
product. Individual products may have additional or different warranties as stated on product literature,
package inserts or product packages. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF
DEALING, CUSTOM OR USAGE OF TRADE. User is responsible for determining whether the 3M product
is fit for a particular purpose and suitable for user’s application. If the 3M product is defective within the
warranty period, your exclusive remedy and 3M’s and seller’s sole obligation will be, at 3M’s option, to
replace the product or refund the purchase price.
Warranty and
Limited Remedy
Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the
3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory
asserted, including warranty, contract, negligence or strict liability.
Limitation of Liability
This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001:2000 standards.
ISO 9001:2000
3
Industrial Business
Industrial Adhesives and Tapes Division
3M Center, Building 21-1W-10, 900 Bush Avenue
|
|
|
 |
|
 |
|
|
|